Welcome to Ruihui official website Chinese |English

how to use zig zag feeder machine

Time:2022-07-23 14:48:57  Source:www.ruihui.net  Author:RUIHUI
When the ordinary feeder is used with the punching machine for wafer blanking production, there will be a lot of leftovers, resulting in a great waste of materials. When the zig zag feeder is used with a punch, it can feed in a straight line, or move it back and forth left and right. And only need to set the yaw angle and the yaw distance can automatically achieve the purpose of cutting each other when cutting. Relatively speaking, the production cost can be effectively controlled, and it is mostly used in the stamping industry of auto parts, electrical appliances, pots and fire extinguishers with wide materials and long feeding steps.

RUIHUI zig zag feeder is composed of three main structures: working frame, feeder head and electric control box:

1. There are two parallel linear guide rails in the left and right directions on the working frame, which are parallel to the two guide rails and are provided with a ball screw at the center of the two guide rails. There is a screw sleeve, and the screw sleeve is matched with the thread of the ball screw;

2. There are two parallel shafts parallel to the left and right on the left and right moving frames. The parallel shafts are perpendicular to the guide rails of the machine base. The parallel shafts are fixed in the left and right moving frames. There are screws between the two parallel shafts. A front and rear moving frame is provided, and a screw sleeve is arranged under the front and rear moving frame, and the screw sleeve is matched with the thread of the screw rod of the left and right moving frames;

3. A servo motor is added in the machine base to drive the screw and ball screw, and the servo motor is connected with the control box through the signal line.

 When the zig zag feeder is actually used with the punch press, after the program is set in the control box, the servo motor of the punch feeder drives the ball screw to push the left and right moving frames, and the material is pushed into the punch press from left to right to start punching. When the material is punched from left to right After the completion, the servo motor will drive the screws on the left and right moving frames to push the front and rear moving frames forward, and then the servo motor will drive the ball screw to push the left and right moving frames back from right to left, and the second row of materials starts to punch again. so round
Intercut stamping production maximizes the utilization of materials.

Address: Chuangxing NO.12, Baisha , Humen , Dongguan, Guangdong, China

Tel:+86-769-8929 6726  Mail:sales@ruihui.cn

WhatsApp/WeChat:+86-13826917409