Welcome to Ruihui official website Chinese |English

Precautions for loading and unloading rolls of stamping three-in-one decoiler straightener feeder

Time:2022-08-27 09:02:33  Source:www.ruihui.net  Author:RUIHUI
We all know that the stamping three-in-one decoiler straightener feeder is the starting equipment of the stamping line. The first step in the stamping production is to put the material into the uncoiler for uncoiling, and then a series of subsequent production processes can be carried out. Then the stamping three-in-one What are the precautions for how the feeder loads and loads the metal coil?

The rolls carried by the stamping three-in-one decoiler straightener feeder are heavy, so special attention should be paid to loading and unloading. The rolls can be loaded and unloaded in the following three ways:

1. The 2T unloading roll can be loaded and unloaded by the three-in-one decoiler straightener feeder using a crane (crown)

When using the row crane to load and unload the three-in-one decoiler straightener feeder, you need to pay attention:

1. Do not allow overloading, confirm that the crane is in good use, and confirm that the hook on the crane is safe and well installed

2. Do not use the bundling belt to hang on the crane. Generally, the bundling belt cannot carry the entire weight of the material when lifting the hoisting roll, and it is easy to cause danger.

3. When the material roll is lifted, the material must be moved or unloaded carefully and slowly to reduce swaying and turbulence. Use other auxiliary devices to cooperate with the crane feeding/unloading establishment. Use hooks or buckles and other devices to enter. Loading/unloading.

4. When lifting the material roll, make sure that the strapping belt is fastened on the material roll. In the process of loading and unloading, the material roll or C-shaped shackle can be removed by the crane or other auxiliary equipment. , Do not stand beside the reel, do not stand on the aisle of the reel.

二. When the material is heavy (above 2T), use the trolley device to load and unload the three-in-one decoiler straightener feeder

When using the trolley device to load and unload the three-in-one decoiler straightener feeder, the following instructions must be strictly followed

1. To avoid unnecessary danger, clear all coil positioning and auxiliary equipment for loading and unloading

2. The coil material should not be overweight, and the trolley device must be used for loading and unloading at a safe/reasonable speed.

3. When feeding the material, make sure that the material roll is fully supported, do not drop the material roll directly onto the material rack, and do not roll yourself close to the material into the equipment.

Address: Chuangxing NO.12, Baisha , Humen , Dongguan, Guangdong, China

Tel:+86-769-8929 6726  Mail:sales@ruihui.cn

WhatsApp/WeChat:+86-13826917409